User's Guide

To determine the week days that are work days for you,
select Workdays.
Enhancement settings
Select Menu > Tools > Settings > General >
Enhancement.
Common enhancement settings
With most enhancements, you can do the following:
To determine which profile is activated when you attach
an enhancement to your device, select Default profile.
To let the device answer phone calls automatically after 5
seconds when an enhancement is attached, select
Automatic answer > On. If the ringing type is set to
Beep once or Silent in the selected profile, the automatic
answer is disabled.
To illuminate the device while it is attached to an
enhancement, select Lights > On.
Security settings
Select Menu > Tools > Settings > General >
Security.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
Device and SIM card security
To change the PIN code, select Phone and SIM card >
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised use
and is provided with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked, and you
need to use the PUK code to unblock it before you can use
the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM card > Keypad autolock
period.
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is
entered, select Phone and SIM card > Phone autolock
period. Enter a number for the time-out in minutes, or
select None to set off the autolock period. When the device
is locked, you can still answer incoming calls, and calls may
still be possible to the official emergency number
programmed into your device.
To set a new lock code, select Phone and SIM card > Lock
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used,
and both uppercase and lowercase alphabets are possible.
The device notifies you if the lock code is not properly
formatted.
To set the device to ask for the lock code when an
unknown, new SIM card is inserted into your device, select
Phone and SIM card > Lock if SIM card changed. The
device maintains a list of SIM cards that are recognised as
the owners cards.
64
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black