User Manual

Settings
55
1. From the standby mode, select Go to > Quick connect or, from the Wi-Fi
menu, select Quick connect.
2. If you have not connected to WLAN/Wi-Fi first, a message asks if you want to
turn on WLAN/Wi-Fi first. Select Yes.
3. If you are already connected to another network, a message asks if you want
to disconnect from that network. Select Yes.
The phone searches for networks and when the network with the best signal
strength is found, a message is displayed, which confirms the network
connection. If you have not saved the network, a message asks if you want to
save it. Select Yes or No if you want to save the network or not. If no available
networks can be found, No quick connect networks available is displayed.
Available networks
The list of available networks displays all the available networks to which you can
connect. indicates that a network is connected and indicates that a
network is saved.
A network may be hidden and can only be found by searching for its service set
identifier (SSID). An SSID is a code attached to all packets on a wireless network
in order to identify each packet as part of that network. All wireless devices
attempting to communicate with each other must share the same SSID.
1. Select Menu > Settings > Connectivity > Wi-Fi >Available networks.
2. If you have not already connected to WLAN/Wi-Fi, a message asks if you want
to turn on WLAN/Wi-Fi. Select Yes.
The phone searches for available networks and, when the networks are found,
they are listed in signal strength order.
3. Scroll to the network you want, and select Connect.
A message is displayed, which confirms the network connection. If you have
not saved the network, a message asks if you want to save it.
4. Select Yes or No to indicate whether to save the network.
5. To save an available network to which you have not connected, select
Options > Save.
6. To update the list of available networks, select Options > Refresh. If the list of
available networks is empty, select Refresh.