User Manual

Settings
66
Security module settings — to view Security module details, activate Module PIN
request, or change the module PIN and signing PIN. See also “Access codes,” p. 9.
■ Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Restore settings and enter the security code. Data that you have
entered or downloaded is not deleted. For example, names and numbers in
Contacts are not affected.
■ Phone software updates
You may initiate phone software updates from the Phone updates menu. Also,
your service provider may initiate the updates by sending them over the air
directly to your device. This function is known as firmware over the air (FOTA).
Warning: If you install a software update, you cannot use the device,
even to make emergency calls, until the update is completed and the
device is restarted. Be sure to back up data before accepting a FOTA
update.
Download
Select Menu > Settings > Phone > Phone updates to request available phone
software updates from your service provider. Select Current software details to
display the current software version. Select Download phone software to
download and install a phone software update (if an update is available). Follow
the instructions on the display.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Install
Select Install software update to start the installation, if you cancelled the
installation after the download.
The software update may take several minutes.
Note: If there are problems with the download or installation, contact
your service provider.