User Manual

57
7. Use the Alphanumeric keypad to enter the passkey of the headset you want to
pair with and press the OK key.
8. Your phone will then pair with the headset.
Note: The phone automatically attempts to send a passkey of “0000” to
the device and shows the message “ATTEMPTING TO AUTO PAIR.” The
default PIN code is usually 0000. Refer to the Bluetooth accessory’s user
guide for additional information.
■ Sounds Settings
To adjust volumes and assign sounds to phone calls and alarms. From Standby
Mode, select MENU > Settings & Tools > Sounds Settings and from the following:
1. Call Sounds — To set ringtones for incoming calls. Select Call Ringtone, scroll
to the desired ringtone, and press OK. To set the phone to vibrate when
receiving a call, select Call Vibrate > On.
2. Alert Sounds — Select the alert type (Tone, Vibrate, or Reminder) for an
incoming text message, picture message, or voicemail. Select Emergency Tone
to set the alert type (Alert, Vibrate, or Off) for emergency dialing.
3. Keypad Volume — To set the volume for the keypad, press the Directional key
Up and Down (this option only works when the master volume is not set to All
Sounds Off, Alarm Only, or Vibrate Only by pressing the Volume keys, see
"Phone at A Glance", p. 10).
4. Service Alerts — To activate an alert.
• ERI — Enhanced roaming indicator (ERI) displays the status of the mobile
service (network service). The status can be "Verizon Network", "Extended
Network", or "Roaming". See "Banner", p. 58.
• Minute Beep — To sound an alert every minute while in a call.
• Call Connect — To alert you when a call is connected.
5. Power On/Off — To enable or disable tones when your phone is turned on or off
(this option only works when the master volume is not set to All Sounds Off,
Alarm Only, or Vibrate Only by pressing the Volume keys, see "Phone at A
Glance", p. 10).
■ Display Settings
To modify the look and feel of the display. From Standby Mode, select MENU >
Settings & Tools > Display Settings.
Draft
— To set ringtones for incoming calls. Select
Draft
— To set ringtones for incoming calls. Select
. To set the phone to vibrate when
Draft
. To set the phone to vibrate when
.
Draft
.
— Select the alert type (
Draft
— Select the alert type (
Tone
Draft
Tone
,
Draft
,
Vibrate
Draft
Vibrate
, or
Draft
, or
Reminder
Draft
Reminder
incoming text message, picture message, or voicemail. Select
Draft
incoming text message, picture message, or voicemail. Select
Vibrate
Draft
Vibrate
, or
Draft
, or
Off
Draft
Off
) for emergency dialing.
Draft
) for emergency dialing.
Off) for emergency dialing.Off
Draft
Off) for emergency dialing.Off
— To set the volume for the ke
Draft
— To set the volume for the ke
Draft
ypad, press the Directional key
Draft
ypad, press the Directional key
Up and Down (this option only works when the master volume is not set to
Draft
Up and Down (this option only works when the master volume is not set to
Alarm Only
Draft
Alarm Only
, or
Draft
, or
Alarm Only, or Alarm Only
Draft
Alarm Only, or Alarm Only
Vibrate Only
Draft
Vibrate Only
by pressing the Volume keys, see
Draft
by pressing the Volume keys, see
Vibrate Only by pressing the Volume keys, see Vibrate Only
Draft
Vibrate Only by pressing the Volume keys, see Vibrate Only
"Phone at A Glance", p. 10).
Draft
"Phone at A Glance", p. 10).
— To activate an alert.
Draft
— To activate an alert.
— Enhanced roaming indicator (ERI) displays the status of the mobile
Draft
— Enhanced roaming indicator (ERI) displays the status of the mobile
service (network service). The status
Draft
service (network service). The status