User Manual

62
information continually available, or E911 Only to make it available for emergency
services only. Press OK to select.
For calls to emergency numbers, location information may be used by the
emergency operator to determine the position of the phone. This feature may not
function in all areas or at all times. The functionality and accuracy of this feature
are dependent on the network, satellite systems, the agency receiving the
information and the fold position. Keeping the fold open helps strengthen the
signal of the internal GPS antenna.
Security
To protect the device from unauthorized use, from Standby Mode, select MENU >
Settings & Tools > Phone Settings > Security. Enter your security code which is by
default the last four digits of your phone number and press OK. Select from the
following options:
Edit Codes — To change the security code.
Restrictions — To prevent the use of certain functions. Enter your security code
which is by default the last four digits of your phone number and press OK.
• Location Setting — To require the security code to access Location Setting,
select Location Setting > Lock Setting. See "Location Setting", p. 61.
• Calls — To restrict calls, select Incoming Calls or Outgoing Calls and select from
the following: Allow All, Contacts Only, or Block All.
• Messages — To restrict messages, select Incoming Messages or Outgoing
Messages and select from the following: Allow All or Block All.
Phone Lock Setting — Select from Unlocked or On Power Up. For On Power Up, only
emergency call, answering incoming calls, and functions of viewing personal
information under ICE Contacts List are available. To disable this setting, select
Unlocked.
Lock Phone Now — To lock the phone with security code. When the phone is
locked, you must enter your lock code to use the phone again.
Restore Phone — To reset phone settings to factory defaults.
System Select
To set your phone to roam or search for another network when you are not in your
home area, from Standby Mode, select MENU > Settings & Tools > Phone Settings
> System Select and one of the following options:
Draft
default the last four digits of your phone number and press
Draft
default the last four digits of your phone number and press
— To change the security code.
Draft
— To change the security code.
— To prevent the use of certain f
Draft
— To prevent the use of certain f
unctions. Enter your security code
Draft
unctions. Enter your security code
which is by default the last four digits of your phone number and press
Draft
which is by default the last four digits of your phone number and press
— To require the security code to access
Draft
— To require the security code to access
Location Setting
Draft
Location Setting
>
Draft
>
Lock Setting
Draft
Lock Setting
. See "Location Setting", p. 61.
Draft
. See "Location Setting", p. 61.
— To restrict calls, select
Draft
— To restrict calls, select
Incoming Calls
Draft
Incoming Calls
Allow All
Draft
Allow All
,
Draft
,
Contacts Only
Draft
Contacts Only
, or
Draft
, or
Contacts Only, or Contacts Only
Draft
Contacts Only, or Contacts Only
Draft
— To restrict messages, select
Draft
— To restrict messages, select
and select from the following:
Draft
and select from the following:
Draft
— Select from
Draft
— Select from