User Manual

Insert the memory card
A memory card may already be in the device. If not,
do the following:
1. Remove the back cover of the device.
2. Insert a compatible
memory card in the
slot. Ensure that the
contact area on the
card is facing down
and towards the slot.
3. Push the card in. You
can hear a click when the
card locks into place.
4. Replace the back cover.
Keep the device facing
down when replacing the
cover. Ensure that the
cover is properly closed.
Remove the memory card
Important: Do not remove the memory card
in the middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as
the device, and data stored on the card may be
corrupted.
1. Before you remove the card, press the power
key, and select Remove memory card. All
applications are closed.
2. When Removing memory card will close all
open applications. Remove anyway? is
displayed, select Yes.
3. When Remove memory card and press 'OK' is
displayed, remove the back cover of the device.
4. Press the memory card to release it from the slot.
5. Pull out the memory card. If the device is
switched on, select OK.
6. Replace the back cover. Ensure that the cover is
properly closed.
Antenna locations
Your device may have internal and external
antennas. As with any radio transmitting device,
avoid touching the antenna area unnecessarily
while the antenna is transmitting or receiving.
Contact with such an antenna affects the
communication quality and may cause the device to
operate at a higher power level than otherwise
needed and may reduce the battery life.
18
Get started
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black