User Manual

1. If the device is not on, switch it on. Check for
adequate signal strength. Depending on your
device, you may also need to complete the
following:
● Insert a SIM card if your device uses one.
● Remove certain call restrictions you have
activated in your device.
● Change your profile from offline profile mode
to an active profile.
● If the screen and keys are locked, slide the lock
switch on the side of the device to unlock
them.
2. Press the end key as many times as needed to
clear the display and ready the device for calls.
3. Open the dialer by selecting the dialer icon (
).
4. Enter the official emergency number for your
present location. Emergency numbers vary by
location.
5. Press the call key.
When making an emergency call, give all the
necessary information as accurately as possible.
Your wireless device may be the only means of
communication at the scene of an accident. Do not
end the call until given permission to do so.
Certification information
(SAR)
This mobile device meets guidelines for
exposure to radio waves.
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for
exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile devices employ
a unit of measurement known as the Specific
Absorption Rate or SAR. The SAR limit stated in the
ICNIRP guidelines is 2.0 watts/kilogram (W/kg)
averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with
the device transmitting at its highest certified
power level in all tested frequency bands. The actual
SAR level of an operating device can be below the
maximum value because the device is designed to
use only the power required to reach the network.
That amount changes depending on a number of
factors such as how close you are to a network base
station.
The highest SAR value under the ICNIRP guidelines
for use of the device at the ear is 0.66 W/kg .
66
Additional safety information
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black