Nokia 6270 User Guide 9242257 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-56 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region.
Contents Contents For your safety.......................... 6 General information................. 9 Overview of functions........................... 9 Access codes............................................ 9 Configuration settings service ........ 10 Download content and applications .......................................... 11 Nokia support and contact information........................................... 11 1. Get started ......................... 13 Install the SIM card and the battery............
Contents Phone ...................................................... Enhancements ...................................... Configuration........................................ Security .................................................. Restore factory settings..................... 69 70 70 71 72 10.Operator menu.................. 73 11.Gallery ............................... 74 Format memory card .......................... 74 12.Media ................................ 75 Camera ..........................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a text and multimedia messaging, push to talk, e-mail application, a clock, an alarm clock, a radio, and a music player. Your phone also supports the following functions: • Active standby. See “Active standby,” p. 20. • Built-in 2 Megapixel camera. See “Camera,” p. 75. • Enhanced voice dialing. See “Enhanced voice dialing,” p. 24 and “Voice commands,” p. 61.
General information PIN codes • The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 71. The PIN code is usually supplied with the SIM card. To set the phone to request the PIN code, see “Security,” p. 71. • The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.
General information browser, you must have the proper configuration settings on your phone. You may receive the settings directly as a configuration message, which you save to your phone. For more information on availability, contact your network operator, service provider, or nearest authorized Nokia dealer. When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed.
General information For maintenance services, check your nearest Nokia service center location at www.nokia.com/repair.
Get started 1. Get started ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with the BL-5C battery.
Get started 4. Insert the SIM card into the SIM card holder (4). Make sure that the SIM card is properly inserted and that the golden contact area on the card is facing downwards. Close the SIM card holder, and press it until it snaps into position. 5. Replace the battery (5). 6. Slide the back cover into place (6). ■ Install a memory card Use only compatible miniSD cards with this device.
Get started You can insert or change the memory card without switching the phone off. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. To insert the memory card, open the memory card holder as shown (1). Place the memory card in the card holder (2).
Get started 1. Connect the charger to a wall socket. 2. Connect the lead from the charger to the CA-44 charging adapter (1), and the adapter to the socket on the bottom of your phone (2). If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The charging time depends on the charger used.
Get started ■ Open the keypad To open the keypad, slide the phone as shown. ■ Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed.
Your phone 2. Your phone ■ Keys and parts • Power key (1) • Loudspeaker (2) • Camera flash (3) • Camera lens (4) • Volume keys (5) • Camera key (6) • Earpiece (7) • Left, middle, and right selection keys (8) The function of these keys depends on the guiding text shown on the display above the keys. • 4-way navigation key (9) Scroll up, down, left, and right. • Call key (10) • End key (11) • Number keys (12) to enter numbers and characters. and # (12) are used for various purposes in different functions.
Your phone • Push to talk key (13) • Infrared (IR) port (14) • Memory card slot (15) • Charger connector (16) • Enhancements connector (17) ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. • Signal strength of the cellular network (1) • Battery charge level (2) • Indicators (3) • The name of the network or the operator logo (4) • Clock (5) • Active standby (6). See “Active standby,” p. 20.
Your phone Active standby In active standby the phone display can show separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4). To select whether the active standby is shown, see Active standby in “Standby mode settings,” p. 59. The active standby is in passive mode when the middle selection key (5) is Menu; you can only view content. To activate the navigation mode and scroll through the content, scroll up or down.
Your phone • Calendar — To view today’s notes, select the desired one. To view the notes for the previous or next days, scroll left or right. • My note — To enter a note, select the content window, write your note, and save it. • My presence — To change your presence status information, select the content item. • Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is shown.
Your phone The phone registered a missed call. Your phone is connected to the instant messaging service, and the availability status is online/offline. / You received one or several instant messages, and you are connected to the instant messaging service. The keypad is locked. The phone does not ring for an incoming call or text message. The alarm clock is set to On. The countdown timer is running. The stopwatch is running in the background. / The phone is registered to the GPRS or EGPRS network.
Your phone A push to talk connection is active/suspended. / ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press within 3.5 seconds to lock the keypad; or close the slide, and select Lock. * To unlock the keypad, open the slide, or select Unlock > OK. If the slide is open, select Unlock, and press within 1.5 seconds. If the Security keyguard is set On, select Unlock, press , and enter the security code.
Call functions 3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. 3. To end the call, or to cancel the call attempt, press the end key.
Call functions Make a voice dialing call If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing. Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 69. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and hold the right selection key.
Call functions Call waiting During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, see “Call,” p. 68. ■ Options during a call Many of the options that you can use during a call are network services. For availability, contact your network operator or service provider. Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.
Write text 4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you write text, or appears at the top of the display, indicating predictive text input, and appears, indicating traditional text input.
Write text 1. Start writing a word using the 2 to 9 keys. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined. If you selected Word suggestions as prediction type, the phone starts to predict the word you are writing. After you enter a few letters, and if these entered letters are not a word, the phone tries to predict longer words. Only the entered letters are displayed underlined.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List, Grid, Grid with labels, or Tab. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2.
Messaging 6. Messaging You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages. All messages are organized into folders. ■ Text messages (SMS) With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service). Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 46.
Messaging 3. Scroll down, and write your message in the Message: field. See “Write text,” p. 27. To insert a template into the message, select Options > Use template. To see how the message will look to the recipient, select Options > Preview. 4. To send the message, select Send. See “Message sending,” p. 33. Read and reply to an SMS message 1 message received, or the number of new messages with messages received are shown when you have received a message. 1. To view a new message, select Show.
Messaging To read SIM messages, select Menu > Messaging > Options > SIM messages. ■ Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. To check availability and to subscribe to the multimedia messaging network service, contact your network operator or service provider. See “Multimedia messages,” p. 47.
Messaging Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide. To insert a file in the message, select Insert; or Options > Insert. 3. To view the message before sending it, select Options > Preview. 4. To send the message, select Send.
Messaging Cancel message sending To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending. Read and reply to a multimedia message Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. Multimedia message received or the number of new messages with messages received is shown when you receive a new multimedia message. 1.
Messaging ■ Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. ■ Folders The phone saves received messages in the Inbox folder.
Messaging Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send. Receive a flash message A received flash message is indicated with the text Message: and a few words from the beginning of the message. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail.
Messaging ■ Instant messaging Instant messaging (IM) (network service) is a way to send short, simple text messages to online users, delivered over TCP/IP protocols. Before you can use instant messaging, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your network operator or service provider, from whom you also receive your unique ID, password, and settings.
Messaging Connect to and disconnect from the instant messaging service To connect to the instant messaging service, access the Instant messages menu, select the desired instant messaging service if needed, and select Login. When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Logout. Start an instant messaging conversation Open the Instant messages menu, and connect to the instant messaging service.
Messaging the network operator or service provider is displayed. To start a conversation, scroll to a group, and select Join. Enter the screen name that you want to use as a nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can also create a private group. See “Groups,” p. 41.
Messaging New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. If the sender is in the phone memory and the phone recognizes it, the name of the person is displayed. To save a new contact that is not in the phone memory, select Options > Save contact. Participate in an instant messaging conversation To join or start a conversation, select Write or start writing.
Messaging 2. Select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually, Search from server, Copy from server, or By mobile number. When the contact is successfully added, the phone confirms it. 3. Scroll to a contact, and to start a conversation, select Chat. Block and unblock messages To block messages, connect to the instant messaging service, and select Conversations > IM contacts, or join or start a conversation.
Messaging Create a private group Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation. ■ E-mail application The e-mail application uses (E)GPRS (network service) to allow you to access your e-mail account from your phone when you are not in the office or at home. This e-mail application is different from the SMS e-mail function.
Messaging Write and send an e-mail You can write your e-mail message before connecting to the e-mail service, or connect to the service first, and then write and send your e-mail. 1. Select Menu > Messaging > E-mail > Create e-mail. 2. Enter the recipient’s e-mail address, and select OK. 3. Write a subject for the e-mail, and select OK. 4. Write the e-mail message. See “Write text,” p. 27. To attach a file to the e-mail, select Options > Attach and a file from Gallery. 5.
Messaging Read and reply to e-mail Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. 1. Select Menu > Messaging > E-mail > Inbox and the desired message. 2. While reading the message, select Options to view the available options. 3. To reply to an e-mail, select Reply > Original text or Empty screen. To reply to many, select Options > Reply to all.
Messaging ■ Voice messages The voice mailbox is a network service and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service provider. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter, search for, or edit your voice mailbox number, select Voice mailbox number. If supported by the network, indicates new voice messages. To call your voice mailbox number, select Listen.
Messaging To delete all messages from all folders, select Menu > Messaging > Delete messages > All messages > Yes. ■ Message settings General settings General settings are common for text and multimedia messages.
Messaging E-mail message centres > Add centre — to set the phone numbers and name of the e-mail center for sending SMS e-mails. If you select SIM e-mail centre, you can view the SIM e-mail center information.
Messaging Incoming multim. msgs. — to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception. This setting is not shown if Allow multimedia recept. is set to No. Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia recept. is set to No, or Incoming multim. msgs. is set to Reject. Configuration settings > Configuration — only the configurations that support multimedia messaging are shown.
Messaging Display terminal window — Select Yes to perform manual user authentication for intranet connections. Incoming server type — Select POP3 or IMAP4, depending on the type of e-mail system that you are using. If both types are supported, select IMAP4. Incoming mail settings — Select available options for POP3 or IMAP4.
Contacts 7. Contacts You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image for a limited number of contacts. The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by . ■ Search for a contact Select Menu > Contacts > Names.
Contacts 3. To add a number, select Number and a number type. To add another detail, select a text type, a ringing tone, an image from Gallery, or a new image. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See “My presence,” p. 52. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.
Contacts To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from Gallery. ■ My presence With the presence service (network service) you can share your presence status with other users with compatible devices and access to the service, such as your family, friends, and colleagues.
Contacts My viewers > Current viewers, Private list, or Blocked list — to view the persons who are subscribed to or blocked from your presence information Settings > Show current pres. in idle, Connection type, or IM and my presence sett. ■ Subscribed names You can create a list of contacts whose presence status information you want to be aware of. You can view the information if it is allowed by the contacts and the network.
Contacts 1. Select Menu > Contacts > Subscribed names. The status information of the first contact on the subscribed names list is displayed. The information that the person wants to make available to others may include text and an icon. , , or indicates that the person is available, not visible to others, or not available. indicates that the person’s presence information is not available. 2.
Contacts Contacts view — to select how the names and numbers in Contacts are displayed Name display — to select whether the contact’s first or last name is displayed first Font size — to set the font size for the list of contacts Memory status — to view the free and used memory capacity ■ Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.
Call log 8. Call log The phone registers your missed, received, and dialed calls if the network supports it and the phone is switched on and within the network service area. To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients.
Call log To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.
Settings 9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles and the desired profile. Select from the following options: Activate — to activate the selected profile Personalise — to personalize the profile. Select the setting you want to change, and make the changes. Timed — to set the profile to be active until a certain time up to 24 hours, and set the end time.
Settings To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. ■ Display With display settings you can personalize your phone display view. Standby mode settings Select Menu > Settings > Display > Standby mode settings and from the following options: Active standby > My active standby — to display the active standby.
Settings Screen saver To select a screen saver from Gallery, select Menu > Settings > Display > Screen saver. Select Screen savers > Image, Slide set, Video clip, or Open camera. To download more screen savers, select Graphic downloads. To select the time after which the screen saver is activated, select Time-out. To activate the screen saver, select On. Power saver To save some battery power, select Menu > Settings > Display > Power saver.
Settings Select Options and from the following options: Select options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark. Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move. Scroll to where you want to move the function, and select OK.
Settings To manage the voice commands, scroll to a phone function, and select from the following options: Edit or Remove — to change or deactivate the voice command of the selected function Add all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list. ■ Connectivity You can connect the phone to a compatible device using an infrared, Bluetooth wireless technology, or USB data cable (CA-53) connection.
Settings Set up a Bluetooth connection Select Menu > Settings > Connectivity > Bluetooth and from the following options: Bluetooth > On or Off — to activate or deactivate the Bluetooth function. indicates an active Bluetooth connection. Search for audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone. Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range.
Settings Infrared You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. You can send or receive data to or from a compatible phone or data device (for example, a computer) through the IR port of your phone. Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.
Settings The applications that may use (E)GPRS are MMS, video streaming, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up. When you have selected GPRS as a data bearer, the phone uses EGPRS instead of GPRS if this is available in the network. You cannot select between EGPRS and GPRS, but for some applications you may be able to select GPRS or GSM data (circuit switched data, CSD).
Settings PC Suite,” p. 104. If you have set the settings both on your PC and on your phone, the PC settings are used. Data transfer Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service). Your phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card.
Settings To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the list, other than Server synchronisation or PC synchronisation. According to the settings, the selected data is copied or synchronized. The other device also must be activated for receiving data. Synchronize from a compatible PC Before you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the Nokia PC Suite software of your phone on the PC.
Settings To activate the memory card for data transfer or picture printing, connect the data cable; when the phone displays USB data cable connected. Select mode., select OK.
Settings Line for outgoing calls — to select the phone line 1 or 2 for making calls if supported by your SIM card (network service). Slide call handling — to set the phone to answer calls when you open the slide, or end the calls when you close it. ■ Phone Select Menu > Settings > Phone and from the following options: Language settings — to set the display language of your phone, select Phone language. If you select Automatic, the phone selects the language according to the information on the SIM card.
Settings ■ Enhancements This menu is shown only if the phone is or has been connected to a compatible mobile enhancement. Select Menu > Settings > Enhancements. Depending on the enhancement, you can select some of the following options: Default profile — to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds.
Settings default settings, select Options > Set as default. To delete configuration settings, select Delete. Activ. default in all apps. — to activate the default configuration settings for supported applications Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number. Connect to serv.
Settings Closed user group — to specify a group of people whom you can call and who can call you (network service) Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use.
Operator menu 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator. If this menu is not shown, the other menu numbers change accordingly. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 99.
Gallery 11. Gallery In this menu you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in Gallery use a memory that may have a capacity of about 5 MB in the phone.
Media 12. Media ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in .jpg format and video clips in .3gp format. Take a photo Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. 1. To open the camera viewfinder, select Menu > Media > Camera. If Video is selected as the default mode, select Options > Still image.
Media Record a video clip Select Menu > Media > Camera > Options > Video > Record. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. To change the folder for saving the recordings, see “Camera settings,” p. 76. Camera settings Select Menu > Media > Camera > Options > Settings.
Media ■ Music player Your phone includes a music player for listening to music tracks, recordings, or other .mp3, .mp4, or .aac format sound files that you have transferred to the phone with the Nokia Audio Manager application. .mp3, .mp4 and .aac format files are stored in the memory card or in the Gallery folders. Music files saved in the Music files folder and in another location, such as a folder of the memory card, are automatically detected and added to the default track list.
Media Track list — to view all the tracks available on the track list. To play a track, scroll to the desired track, and select Play. Select Options > Refresh all tracks or Change track list to refresh the track list (for example, after adding new tracks to the list) or to change the track list that is shown when you open the Music player menu, if several track lists are available in the phone. Play options > Random > On — to play the tracks in the track list in random order.
Media Save radio channels 1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps, briefly press or . 2. To save the channel to a memory location, 1 to 9, press and hold the corresponding number key. To save the channel to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. 3. Enter the name of the channel, and select OK. Listen to the radio Select Menu > Media > Radio.
Media Set frequency — to enter the frequency of the desired radio channel You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted. When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio. ■ Voice recorder You can record pieces of speech, sound, or an active call, and save them in Gallery or a memory card.
Media Define a storage folder To use another folder than Recordings as the default folder in Gallery, select Menu > Media > Voice recorder > Options > Select memory. Scroll to a folder, and select Set. ■ Equalizer You can control the sound quality when using the music player by amplifying or diminishing frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate.
Push to talk 13. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the people you are calling do not have to answer the phone.
Push to talk ■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, you can use the phone normally, by holding it to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls. One-to-one calls are calls you make to only one person.
Push to talk Make a one-to-one call • To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the PTT key. You can also select the contact from Contacts. • To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and press the PTT key.
Push to talk Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send callback. • To send a callback request from Contacts, search for the desired contact, select Details, scroll to the PTT address, and select Options > Send callback.
Push to talk ■ Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways: • To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options > Add detail > Push to talk address. • To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact.
Push to talk Channel security: — Select Public channel or Private channel. To send an invitation to the group, select Yes when the phone requests it. You can send the invitation using a text message or infrared. To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit address manually. Enter the channel address provided by your service provider. Receive an invitation When you receive a text message invitation to a group, Channel invitation received: is displayed. 1.
Push to talk You can also select from the following options: Push to talk user name, Default nickname, Push to talk password, Domain, and Server address. To edit the PTT settings for use, select Menu > Push to talk > Push to talk settings, and from the following options: 1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To make but not receive one-to-one calls, select Off. The service provider may offer some services that override these settings.
Organizer 14. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Organizer The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.
Organizer To view a note, scroll to it, and select View. You can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note to another phone as a text message or a multimedia message, save a note as a calendar note, or access the calendar. While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the note as done.
Organizer ■ Stopwatch You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Select Menu > Organiser > Stopwatch and from the following options: Split timing — to take intermediate times.
Applications 15. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see “Some application options,” p. 93. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown.
Applications Details — to give additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) Application access — to restrict the application from accessing the network. Different categories are shown. Select in each category one of the available permissions. Web page — to provide further information or additional data for the application from an Internet page (network service).
Web 16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
Web ■ Connect to a service First, ensure that the correct configuration settings of the service that you want to use are activated. 1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See “Set up browsing,” p. 95. 3.
Web Browse with phone keys To browse through the page, scroll in any direction. To select a highlighted item, press the call key, or select Select. To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Options while browsing Select from the following options: Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts.
Web 2. Scroll to a bookmark, and select it, or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.
Web Character encoding > Unicode (UTF-8) web add. > On — to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a Web page created in foreign language. Screen size > Full or Small— to set the screen layout JavaScript > Enable — to enable the Java scripts ■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 100.
Web To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox. To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve.
Web ■ Browser security Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature.
Web is displayed during a connection, if the data transmission between the phone and the content server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. Digital signature You can make digital signatures with your phone if your SIM card has a security module.
SIM services 17. SIM services Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
PC connectivity ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service). You may find more information and PC Suite on the Nokia Web site at www.nokia.com/support. ■ Data communication applications For information on using a data communication application, refer to the documentation provided with it.
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
INDEX INDEX A C access codes 9 accessories. See enhancements active standby 20, 59 content items 20 enabling 61 navigation mode 20 passive mode 20 alarm clock 89 antenna 17 applications 93 collection 93 download 94 games 93 downloads 93 settings 93 audio messages 36 cache memory 100 calendar note 90 note alarm 90 call settings 68 call key 18 call log 56 call register.
INDEX PIN 10 PUK 10 security code 9 UPIN 10 UPUK 10 configuration 70 plug and play service 16 settings service 10 contact information 11 contacts business cards 54 caller groups 55 copy 51 delete 51 delete contact details 51, 52 edit details 51 memory in use 54 my numbers 55 my presence 52 save an image 50 save multiple numbers 50 save names 50 save phone numbers 50 save text items 50 search 50 service numbers 55 settings 54 speed dialing 55 subscribed names 53 cookies 99 countdown timer 91 counters.
INDEX I M IM. See instant messaging IMAP4 42 indicators 21 info messages 45 infrared 64 installation battery 13 memory card 14 SIM card 13 instant messaging accept invitation 39 availability 40 block 41 connect/disconnect 38 contacts 40 groups 41 participate in a conversation 40 read 39 reject invitation 39 start session 38 unblock 41 Internet 95 IR port 19 IR.
INDEX my numbers 55 my presence 52 my shortcuts 60 N navigating 29 navigation key 18 network EGSM 7 GSM 7 name on display 19 services 7 Nokia contact information 11 Nokia support 11 notes 91 calendar 90 O operator logo 59 operator menu 73 organiser 89 overview keys and parts 18 P pacemakers 109 packet data 104 connection 65 settings 65 parts 18 PC connectivity 103 PC Suite 104 phone care 108 configuration 70 earpiece 18 keys 18 loudspeaker 18 parts 18 personalize 58, 59 settings 69 phone lock.
INDEX guidelines 6 hearing aids 110 medical devices 109 operating environment 109 pacemakers 109 SAR 111 vehicles 110 SAR 111 screen saver 60 script settings 99 scripts over secure connection 99 scroll key.
INDEX U W unlock keypad 23 UPIN 10 UPIN code 16 UPUK code 10 wallpaper 58, 59 Web 95 bookmarks 97 connect 96 wireless markup language 95 wrist strap 17 write text 27 writing language 27 V vehicles 110 vibrating alert 58 video clip 76 voice commands 61 voice dialing 24 voice messages 45 voice recorder 80 volume keys 18 118 X XHTML 95
