User Manual

2 Insert the card into the memory card slot with the contact surface facing up, and

press until it locks into place.

3 Close the cover of the memory card slot.

Remove the microSD card

Important: Do not remove the memory card during an operation when the card is

being accessed. Doing so may damage the memory card and the device, and corrupt

data stored on the card.

You can remove or replace the memory card during phone operation without switching

the device off, but you need to ensure that no application is currently accessing the

memory card.

Charge the battery

Your battery has been partially charged at the factory. If the device indicates a low

charge, do the following:

1 Connect the charger to a wall outlet.

Connect the charger to the device.

3 When the device indicates a full charge, disconnect the charger from the device,

then from the wall outlet.

You do not need to charge the battery for a specific length of time, and you can use the

device while it is charging. If the battery is completely discharged, it may take several

minutes before the charging indicator appears on the display or before any calls can be

made.

6Get started

6 www.nokia.com/support

Cyan

Magenta

Yellow

Black