User Manual

Contacts

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9. To dial those

entries, press and hold the assigned key. See "1-touch dialing," p. 64 to activate

or deactivate 1-touch dialing.

Assign a key to 1-touch dialing

1. In the standby mode, select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot, and select Assign.

3. Enter the number (including the area code) and a name for the number, and

select OK; or select Search to retrieve a number from the contacts list.

If 1-touch dialing is off, the device displays a prompt and asks if you want to

turn 1-touch dialing on.

4. Select Yes to activate 1-touch dialing.

Change 1-touch dialing numbers

1. In the standby mode, select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you want to change, and select Options >

Change.

3. Enter the new number and a name for the entry, and select OK; or select

Search to retrieve a number from the contacts list.

Delete 1-touch dialing numbers

1. In the standby mode, select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you want to delete, and select Options >

Delete > Yes.

■ Voice tags

You can dial up to 25 stored numbers using voice dialing.

Before using voice tags, note the following:

• Voice tags are not language-dependent. They depend on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags, and use them

in a quiet environment.

FCC Draft