User Manual

Media
57
1. When the radio is on, select or to change the radio frequency in
0.1 MHz steps, or select and hold or to start the channel search.
Searching stops when a channel is found.
2. To save the channel, select Options > Save channel.
To save the channel to a memory location 1 to 9, press and hold the
corresponding number key while the radio is playing. To save the channel in
the memory location from 10 to 20, press briefly 1 or 2 and the desired
number key 0 to 9.
3. Enter a name for the channel, and select OK.
4. Select an (empty) location to save the channel.
■ Voice recorder
This feature enables you to record pieces of speech or sound with your device and
listen to them later. The total available time is 3 minutes with no memos stored.
The maximum length of a recording depends on how much memory remains
available.
In the standby mode, select Menu > Media > Recorder > Record to start the
recording or Recordings list to manage the folder you have defined for recording
storage.
Record speech or sound
1. In the standby mode, select Menu > Media > Recorder > Record.
2. After you hear the recorder start tone, begin recording speech or sound.
3. When you finish recording, select Stop and your recording is saved to the
Recordings folder in the Gallery.
Options
After you have saved the recording to the Recordings folder, highlight the
recording, and select Open to listen to the recording using the earpiece; or select
Options and one of the following.
Delete—Erase the recording.
Rename—Change the name of the recording.
Set as ring tone—Use your recording as a ringtone (a carrier-dependent feature).
FCC Draft