User Manual

Settings

4. Enter the required information (access number or prefix and card number),

and select OK to confirm your entries.

5. Select Card name, enter the card name, and select OK.

Make calls

After you have saved your calling card information in your device, you can make a

call using your calling card.

1. In the standby mode, select Menu > Settings > Call > Calling card.

2. Enter your lock code, and select OK. See "Change lock code," p. 72.

3. Select your desired calling card.

4. Press the end key to return to the standby mode; then enter the phone

number, including any prefix (such as 0 or 1) that your calling card may

require when you make a calling card call. See your calling card for

instructions

5. Press and hold the call key for a few seconds until Card call appears.

6. When you hear the tone or system message, select OK.

Abbreviated dialing

Abbreviated dialing creates 4-5 digit numbers for your contacts.

In the standby mode, select Menu > Settings > Call > Abbreviated dialing > On or

Off.

International prefix

You can store an international dialing prefix into your device. In the standby

mode, select Menu > Settings > Call > International prefix.

In the standby mode, when you enter + (press * twice) at the beginning of a

phone number, your device automatically inserts the international dialing prefix

that you have stored after you press the call key. See "Insert dialing codes," p. 41.

Data or fax calls

Data and fax calling is a network service. See "Network Services," p. 6. If your

wireless service provider supports this feature, you can set up the device to send

or receive data and fax calls with a terminal, such as a PDA or PC, connected.

FCC Draft