User Manual

Settings

For better performance during data calls, place the device on a stationary

surface. Do not move the device by holding it in your hand during a data call.

For more information on connectivity, refer to the PC/PDA Connectivity Guide

which can be downloaded from the Nokia website at http://www.nokia.com/us.

1. In the standby mode, select Menu > Settings > Call > Data/fax calls >

Incoming data/fax call and one of the following options:

Normal—The device receives incoming calls as usual.

Data calls only—The device receives only data calls.

Fax calls only—The device receives only fax calls.

2. When finished with receiving the fax or data call, repeat steps 1 and 2, and

select Normal.

Data transfer

You can view the transmission speed when sending or receiving data and fax

calls.

In the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate

display > Graphic or Off.

Call summary

Your device can display the time spent on a call when you hang up. In the standby

mode, select Menu > Settings > Call > Call summary > On or Off.

Ringing tone for no caller ID

You can select a different ringing tone for calls received with no caller ID.

In the standby mode, select Menu > Settings > Call > Ringing tone for no caller

ID > On or Off.

Video ringing tone

Select video ringing tone to replace the default audio ringing tone with the

selected video. To select video ringing tone, in the standby mode, select Menu >

Settings > Call > Video ringing tone > On or Off.

FCC Draft