User Manual

Settings

Fixed—Used to send tones of the duration you specify in the Touch tone length

option.

Off—Used to turn off tones. No tones are sent when you press a key.

Set length

You can specify touch-tone length for the Fixed option. In the standby mode,

select Menu > Settings > Phone > Touch tones > Touch tone length > Short

(0.1 seconds) or Long (0.5 seconds).

Start-up tone

You can select to have a start-up tone when you first turn on your device. In the

standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.

Power-down tone

You can select to have a power-down tone when you turn off your device. In the

standby mode, select Menu > Settings > Phone > Switch off tone > On or Off.

Help text activation

Your device displays brief descriptions for most menu items. When you arrive at a

feature or menu, pause for about 14 seconds and wait for the help text to display.

If necessary, use the scroll key to page through the full help text.

The default setting for help text is On. However, you can turn help text on or off.

In the standby mode, select Menu > Settings > Phone > Help text activation > On

or Off.

■ Voice commands

Before using voice tags, note the following:

• Voice tags are not language-dependent, but depend on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags, and use them

in a quiet environment.

• Very short names are not accepted. Use long names, and avoid similar names

for different numbers.

FCC Draft