User Manual

Host address — Enter the web address
of the configuration server.
Port — Enter the port number of the
server.
User name and Password — Enter your
user ID and password for the
configuration server.
Allow configuration — Select Yes to
allow the server to initiate a
configuration session.
Auto-accept all requests — Select
Yes if you do not want the server to ask
for your confirmation when it initiates
a configuration session.
Network authentication — Select
whether to use http authentication.
Network user name and Network
password — Enter your user ID and
password for the http authentication.
This setting is available only if you have
selected Network authentication to
be used.
To connect to the server and receive
configuration settings for your device,
select Options > Start configuration.
To view the configuration log of the
selected profile, select Options > View
log.
To update the device software over the
air, select Options > Check for
updates. The update does not erase
your settings. When you receive the
update package on your device, follow
the instructions on the display. Your
device is restarted once the installation
is complete.
Downloading software updates may
involve the transmission of large
amounts of data (network service).
Make sure that the device battery has
enough power, or connect the charger
before starting the update.
Warning:
If you install a software update, you
cannot use the device, even to make
emergency calls, until the installation is
completed and the device is restarted.
Be sure to back up data befo r e accepting
installation of an update.
146 Security and data management
© 2010 Nokia. All rights reserved.