User Manual

are displayed and can be shared by a
new access point.
If you skip this step, you are asked to
select a connection method and to
define the settings needed.
To edit the settings of an access point,
select one of the access point groups,
scroll to an access point, and select
Options > Edit. Use the instructions
provided by your service provider to edit
the following:
Connection name — Enter a name for
the connection.
Data bearer — Select the data
connection type.
Depending on the data connection you
select, only certain setting fields are
available. Fill in all fields marked with
Must be defined or with a red *. Other
fields can be left empty, unless your
service provider has instructed
otherwise.
To use a data connection, your service
provider must support this feature, and
if necessary, activate it for your SIM card.
Create access point groups
Select Menu > Ctrl. panel > Settings
and Connection > Destinations.
Some applications allow you to use
access point groups to connect to a
network.
To avoid selecting which access point to
use every time the device attempts to
connect to a network, you can create a
group that contains various access
points, and define the order in which
the access points are used to connect to
a network.
For example, you can add wireless LAN
(WLAN) and packet data access points to
an internet access point group and use
the group for browsing the web. If you
give the WLAN access point the higher
priority, the device connects to the
internet through a WLAN if available
and through a packet data connection if
not.
To create a new access point group,
select Options > Manage > New
destination.
162 Settings
© 2010 Nokia. All rights reserved.