User Manual

To add access points to an access point
group, select the group and Options >
New access point. To copy an existing
access point from another group, select
the group, scroll to an existing access
point, and select Options >
Organise > Copy to other dest..
To change the priority order of access
points within a group, scroll to an access
point, and select Options >
Organise > Change priority.
Packet data access points
Select Menu > Ctrl. panel > Settings
and Connection > Destinations >
Access point, and follow the
instructions on the screen.
To edit a packet data access point, open
one of the access point groups, and
select an access point marked with
.
Follow the instructions from your
service provider.
Select from the following:
Connection name — Define a name for
the connection.
Data bearer — You might not be able
to edit the data bearer once defined.
Define a new access point if needed.
Access point name — You obtain the
access point name from your service
provider.
User name — The user name may be
needed to make a data connection, and
is usually provided by your service
provider.
Prompt password — If you must enter
the password every time you log in to a
server, or if you do not want to save your
password in the device, select Yes.
Password — A password may be
needed to make a data connection and
is usually provided by your service
provider.
Authentication — Select Secure to
always send your password encrypted
or Normal to send your password
encrypted when possible.
Homepage — Depending on the access
point you are setting up, enter the web
address or the address of the
multimedia message centre.
Settings 163
© 2010 Nokia. All rights reserved.