User Manual

acknowledgement signal from the
network.
Short retry limit — Enter the maximum
number of transmission attempts if the
device does not receive a clear-to-send
signal from the network.
RTS threshold — Select the data packet
size at which the WLAN access point
device issues a request to send before
sending the packet.
TX power level — Select the power
level of your device when sending data.
Radio measurements — Enable or
disable the radio measurements.
Power saving — Select whether to use
the WLAN power saving mechanism to
save the power in the device battery.
Using the power saving mechanism
enhances the battery performance but
may weaken WLAN interoperability.
To restore all settings to their original
values, select Options > Restore
defaults.
WLAN security settings
Select Menu > Ctrl. panel > Settings
and Connection > Destinations >
Access point, and follow the
instructions on the display.
To edit a wireless LAN (WLAN) access
point, open one of the access point
groups, and select an access point
marked with
.
To enter the settings for the selected
security mode, select WLAN security
settings.
WEP security settings
Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP)
encryption method encrypts data
before it is transmitted. Access to the
network is denied to users who do not
have the required WEP keys. When the
WEP security mode is in use, and your
device receives a data packet not
encrypted with the WEP keys, the data
is discarded.
In an ad-hoc network, all devices must
use the same WEP key.
Select WLAN security settings and
from the following:
Settings 167
© 2010 Nokia. All rights reserved.