User Manual

WEP key in use — Select the desired
WEP key.
Authentication type — Select Open or
Shared.
WEP key settings — Edit the settings
for the WEP key.
WEP key settings
In an ad-hoc network, all devices must
use the same WEP key.
Select WLAN security settings > WEP
key settings and from the following:
WEP encryption — Select the desired
WEP encryption key length.
WEP key format — Select whether you
want to enter the WEP key data in
ASCII or Hexadecimal format.
WEP key — Enter the WEP key data.
802.1x security settings
Select 802.1x as the WLAN security
mode.
802.1x authenticates and authorises
devices to access a wireless network,
and prevents access if the authorisation
process fails.
Select WLAN security settings and
from the following:
WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared
key (a secret key used for device
identification).
EAP plug-in settings — If you selected
WPA/WPA2 > EAP, select which EAP
plug-ins defined in your device to use
with the access point.
Pre-shared key — If you selected
WPA/WPA2 > Pre-shared key, enter
the shared private key that identifies
your device to the WLAN to which you
connect.
WPA security settings
Select WPA/WPA2 as the WLAN security
mode.
Select WLAN security settings and
from the following:
WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared
key (a secret key used for device
identification).
EAP plug-in settings — If you select
WPA/WPA2 > EAP, select which EAP
plug-ins defined in your device to use
with the access point.
168 Settings
© 2010 Nokia. All rights reserved.