User Manual

Your phone
19
The phone does not ring for an incoming call or text message
when Incoming call alert and Message alert tone are set to Off.
See “Tones,” p. 51.
The alarm clock is set to On. See “Alarm clock,” p. 65.
When the packet data connection mode Always online is
selected and the packet data service is available, the indicator is
shown. See “Packet data (EGPRS),” p. 56.
A packet data connection is established. See “Packet data
(EGPRS),” p. 56 and “Browse pages,” p. 83.
The packet data connection is suspended (on hold), for example,
if there is an incoming or outgoing call during a packet data
dial-up connection.
When the infrared connection is activated, the indicator is
shown continuously.
■ Keypad lock (keyguard)
To prevent the keys from being accidentally pressed, select Menu, and
press * within 3.5 seconds to lock the keypad.
To unlock the keypad, select Unlock, and press *. If the Security keyguard
is set On, enter the security code if requested.
To answer a call when the keyguard is on, press the call key. When you
end or reject the call, the keypad automatically locks.
For Automatic keyguard and Security keyguard, see “Phone,” p. 54.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device.