User Manual

Messages
41
Default slide timing — to define the default time between slides in
multimedia messages
Allow multimedia reception > Yes or No — to receive or to block the
multimedia message. If you select In home network, you cannot receive
multimedia messages when outside your home network.
Incoming multimedia messages > Retrieve, Retrieve manually, or Reject
— to allow the reception of multimedia messages automatically,
manually after being prompted, or to reject the reception
Configuration settings > Configuration — Only the configurations that
support multimedia messaging are shown. Select a service provider,
Default, or Personal config. for multimedia messaging. Select Account
and select a multimedia messaging service account contained in the
active configuration settings.
Allow adverts — to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No.
E-mail
The settings affect the sending, receiving, and viewing of e-mail.
You may receive the configuration settings for the e-mail application as
a configuration message. See “Configuration settings service,” p. 11.
You can also enter the settings manually. See “Configuration,” p. 58.
To activate the settings for the e-mail application, select Menu >
Messages > Message settings > E-mail messages and from the
following options:
Configuration — Select the set that you would like to activate.
Account — Select an account provided by the service provider.
My name — Enter your name or nickname.
E-mail address — Enter e-mail address.
Include signature — You can define a signature that is automatically
added to the end of your e-mail when you write your message.
Reply-to address — Enter the e-mail address to which you want the
replies to be sent.