User Manual

Settings
59
■ Security
When security features that restrict calls are in use (such as call barring, closed
user group and fixed dialing) calls still may be possible to the official emergency
number programmed into your device.
Select Menu > Settings > Security and from the following options:
PIN code request — to set the phone to ask for your PIN or UPIN code
every time the phone is switched on. Some SIM cards do not allow the
code request to be turned off.
Call barring service (network service) — to restrict incoming calls to and
outgoing calls from your phone. A barring password is required.
Fixed dialling — to restrict your outgoing calls to selected phone
numbers if this function is supported by your SIM card
Closed user group (network service) — to specify a group of people
whom you can call and who can call you
Security level > Phone — the phone asks for the security code whenever
a new SIM card is inserted into the phone. Select Memory and the phone
asks for the security code when SIM card memory is selected and you
want to change the memory in use.
Access codes — to set the PIN code or UPIN code in use, or to change the
security code, PIN code, UPIN code, PIN2 code, and barring password
Code in use — to select whether the PIN code or UPIN code should be
active
Pin2 code request — to select whether PIN2 code is required when using
a specific phone feature which is covered by the PIN2 code
■ Restore factory settings
To reset some of the menu settings to their original values, select
Menu > Settings > Restore factory sett.. Enter the security code. The
data you have entered or downloaded are not deleted, for example, the
names and phone numbers saved in Contacts.