User Manual

Table Of Contents
Push to talk
80
3. Enter the name for the group, and select OK.
4. Select Default, Listened, or Inactive. The phone indicates that the
group is saved and its status. Default and Listened are active groups.
When you press the PTT key to make a group call, the default group is
called if you have not scrolled to any other group or contact.
5. To send an invitation to the group, select Yes when the phone
requests it. You can send the invitation using a text message or IR.
The members you invite to the public groups can also invite more
members to the group.
Receive an invitation
1. When you receive a text message invitation to a group, Group
invitation received: is displayed.
2. To view the nickname of the person who sent the invitation and the
group address if the group is not a private group, select View.
3. To add the group to your phone, select Save. To set the status for the
group, select Default, Listened, or Inactive.
To reject the invitation, select Exit > Yes, or select View > Discard > Yes.
PTT settings
There are two kinds of PTT settings: settings for connecting to the
service and settings for use.
You may receive the settings for connecting to the service from your
network operator or service provider. See “Configuration settings
service,” p. 11. You can enter the settings manually. See
“Configuration,” p. 58.
To select the settings for connecting to the service, select Menu > Push
to talk > Config. settings and from the following options:
Configuration — to select a service provider, Default, or Personal config.
for PTT service. Only the configurations that support the PTT service are
shown.
Accountto select a PTT service account contained in the active
configuration settings