User Manual
Table Of Contents
- Nokia E62 User Guide
- Contents
- For your safety
- Get started
- Get started (part 2)
- Your device
- Your device (part 2)
- Make calls
- Contacts
- Messages
- Organizer
- Personalization
- Media applications
- Services
- Web
- Connectivity
- Office applications
- Settings
- Tools
- Device management
- Shortcuts
- Nokia original enhancements
- Battery information
- Care and maintenance
- Additional safety information
- Index
FCC DRAFT
device. The passcode is used only once to confirm this
connection.
6. Enter the code on your Nokia device, and select OK.
Enter the passcode on your other device, and select
OK. The devices are now paired. See "Pair
devices," p. 71.
For some phone models, the Transfer data application
is sent to your other device as a message. To install
Transfer data on your other device, open the message,
and follow the instructions on the display.
7. From your Nokia device, select the content you want
to transfer from your other device, and OK.
Infrared connectivity
1. In the information view, select Continue.
2. Select Via infrared. Both devices must support the
selected connection type.
3. Connect the two devices. See "Infrared," p. 73.
4. From your Nokia device, select the content you want
to transfer from your other device, and OK.
Content is copied from the memory of the other device to
the corresponding location in your device. Copying time
depends on the amount of data to be transferred. You can
also cancel and continue later.
The necessary steps for data transfer may vary depending
on your device, and whether you have interrupted data
transfer earlier. The items that you can transfer vary
depending on the other device.
Synchronize data with another
device
If you have previously transferred data to your Nokia
device, and your other device supports synchronization,
you can use Transfer to keep the data of the two devices
up to date. Use caution when synchronizing, if you use a
proprietary e-mail client. Data may conflict or may be
overwritten.
1. Select Phones, and press the joystick.
2. Scroll to the device from which you transferred data,
and press the joystick.
3. Select Synchronize, and press the joystick. The devices
start synchronizing using the same connection type
that you selected when you originally transferred
data. Only the data that you originally selected for
data transfer is synchronized.
To modify the data transfer and synchronization settings,
select Synchronize, scroll to a device, press the joystick,
and select Edit.
24
Your device
file:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 24 Jan 16, 2006 10:36:24 PMfile:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 24 Jan 16, 2006 10:36:24 PM