User Manual

FCC DRAFT
E-mail account settings
Select Menu > Messag. > Mailbox.
The settings available for editing may vary. Some settings
may be preset by your service provider.
If you try to edit mailbox settings but have not set up an
e-mail account, the mailbox guide opens and helps you
set up your e-mail account.
Settings for the received e-mail
Select Incoming e-mail and from the following settings:
• User name — Enter the user name for the e-mail
service.
• Password — Enter the password for the e-mail service.
• Incoming mail serv. — Enter the IP address or host
name of the server that receives your e-mail.
• Access point in use — Select the Internet access point
that the device uses for retrieving the e-mail messages
that you receive.
• Mailbox name — Enter a name for the mailbox.
• Mailbox type — Select the mailbox protocol that your
remote mailbox service provider recommends. The
options are POP3 and IMAP4. This setting can be
selected only once and cannot be changed if you have
saved or exited from the mailbox settings. If you use
the POP3 protocol, e-mail messages are not updated
automatically when you are online. To see the latest e-
mail messages, you must disconnect and make a new
connection to your mailbox.
• Security (ports) — Select the security option used to
secure the connection to the remote mailbox.
• Port — Define a port for connection.
• APOP secure login (for POP3 only) — Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
Settings for sent e-mail
Select Outgoing e-mail and from the following settings:
• My e-mail address — Enter the e-mail address given to
you by your service provider. Replies to your messages
are sent to this address.
• User name — Enter the user name for the e-mail
service.
• Password — Enter the password for the e-mail service.
• Outgoing mail serv. — Enter the IP address or host
name of the mail server that sends your e-mail. You
may only be able to use the outgoing server of your
network operator. Contact your service provider for
more information.
• Access point in use — Select the Internet access point
that the device uses for sending the e-mail messages
that you send.
• Security (ports) — Select the security option used to
secure the connection to the remote mailbox.
• Port — Define a port for connection.
User settings
Select User settings and from the following settings:
• My name — Enter a name to appear before your e-mail
address when you send e-mail.
• #MISSING — Select whether you want replies to be
redirected to a different address. Select #MISSING, and
enter the e-mail address to which you want to direct
the replies. You can only enter one address.
• {No display_text mapping for
'qtn_mbxs_settings_def_delete_messages', locale='en-
45
Messages
file:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 45 Jan 16, 2006 10:36:24 PMfile:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 45 Jan 16, 2006 10:36:24 PM