User Manual

FCC DRAFT
also receive the access points settings in a message from
your service provider. This might reduce the number of
settings you need to enter yourself.
The available options may vary. Some or all access points
may be preset for your device by your service provider.
You may not be able to add, edit, or delete access points.
Contact your service provider and e-mail service provider
for more information on access points and their settings.
See "Connection settings," p. 87.
Set up an Internet access point for
packet data (GPRS)
1. Select Menu > Tools > Settings > Connection >
Access points.
2. Select Options > New access point. To use an existing
access point as a basis for the new one, select Use
existing settings. To start with an empty access point,
select Use default settings.
3. Define the following settings.
• Connection name — Enter a descriptive name for
the connection.
• Data bearer — Select Packet data.
• Access point name — Enter the name for the access
point. The name is usually provided by your service
provider or network operator.
• User name — Enter your user name if required by
the service provider. User names are often case-
sensitive and provided by your service provider.
• Prompt password — Select Yes to enter your
password each time you log into a server or No to
save the password in your device memory and
automate the login.
• Password — Enter your password if required by
the service provider. The password is often case-
sensitive provided by the service provider.
• Authentication — Select Secure to always send
your password encrypted or Normal to send your
password encrypted when possible.
• Homepage — Enter the Web address of the page
you want to display as a home page when you use
this access point.
4. After defining the settings, select Options > Advanced
settings to define the advanced settings or Back to
save the settings and exit.
For information on the advanced settings, see the
extended user guide on the Web.
SIM access profile
With the SIM access profile, you can access the SIM card of
your device from a compatible car kit device. This way,
you do not need a separate SIM card to access SIM card
data and connect to the GSM network.
To use the SIM access profile, you need the following:
• Compatible car kit device that supports Bluetooth
wireless technology
• Valid SIM card in your device
For more information about car kit devices and
compatibility with your device, see www.nokia.com and
your car kit user guide.
74
Connectivity
file:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 74 Jan 16, 2006 10:36:24 PMfile:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 74 Jan 16, 2006 10:36:24 PM