User's Guide
Table Of Contents
- Nokia E61 User Guide
- Contents
- For your safety
- Get started
- Insert the SIM card and battery
- Insert and remove a memory card
- Charge the battery
- Switch on your device
- Enter first settings
- Keys and parts
- Keypad lock (keyguard)
- Connectors
- Antennas
- Volume control
- About the display
- Standby modes
- Display indicators
- Memory
- Help and tutorial
- Nokia PC Suite
- Nokia support and contact information
- Your device
- Transfer content between devices
- Messages
- Make calls
- Contacts
- Calendar
- Clock
- Connectivity
- Web
- Office applications
- Organiser
- Data and software management
- Tools
- Media applications
- Personalization
- Settings
- Security
- Shortcuts
- Battery information
- Care and maintenance
- Additional safety information
- Index
Security
Device security
Select Menu > Tools > Settings > Security > Phone
and SIM.
You can modify the security settings for the PIN code,
automatic lock, and SIM card change, and change codes
and passwords.
Avoid using codes that are similar to emergency
numbers to prevent accidental dialing of the
emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
Define security settings
To define device and SIM card settings, select a setting
and Options > Change.
When calls are limited to closed user groups, calls may
be possible to the official emergency number
programmed into your device.
Define the following settings:
• PIN code request — Select On to request that the PIN
code is entered each time the device is switched on.
This setting cannot be changed if the device is
switched off. Some SIM cards do not allow turning
off the PIN code request.
• PIN code — Change the PIN code. The PIN code must
be 4 to 8 numbers long. The PIN code protects your
SIM card against unauthorized use and is provided
with the SIM card. After three consecutive incorrect
PIN code entries, the PIN code is blocked, and you
need to use the PUK code to unblock it before you
can use the SIM card again.
• PIN2 code — Change the PIN2 code. The PIN2 code
must be 4 to 8 numbers long. The PIN2 code is
required to access some functions of the device and
is provided with the SIM card. After three consecutive
incorrect PIN2 code entries, the PIN2 code is blocked,
and you need to use the PUK2 code to unblock it
before you can use the SIM card again.
• Autolock period — Set a time-out after which the
device is automatically locked and can be used only
if the correct lock code is entered. Enter a number for
the time-out in minutes, or select None to turn off
the autolock period. When the device is locked, you
can still answer incoming calls and calls may still be
possible to the official emergency number
programmed into your device.
• Lock code — Change the lock code. The new code
can be 4-256 characters long. Both alphabets and
digits can be used, and both uppercase and
lowercase alphabets are possible. The device
notifies you if the lock code is not properly
formatted. The device remembers the previously
used lock codes and prevents you from using the
same lock code several times. The preset code is
12345. To avoid unauthorized use of your device,
103
Security
file:///C:/USERS/MODEServer/lkatajis/12724600/rm-89_smailer/en/issue_1/rm-89_smailer_en_1.xml Page 103 Jan 12, 2006 8:40:21 AM