User's Guide

Clock
Select Menu > Clock.
To change the clock type, select Options > Settings >
Clock type > Analogue or Digital.
Date and time settings
To change the date and time, their display formats,
alarm tone, and to define whether you want to use
automatic time update and daylight savings time,
select Options > Settings and from the following:
• Time — Enter the time, and select OK.
• Time zone — Enter the time zone, and select OK.
• Date — Enter the date, and select OK.
• Date format — Change how the date is displayed.
Scroll to the desired format, and select OK.
• Date separator — Change the symbol that separates
days, months, and years. Scroll to the symbol you
want, and select OK.
• Time format — Select 24-hour or 12-hour.
• Time separator — Select the symbol that separates
hours and minutes.
• Clock type — Select Analogue or Digital.
• Clock alarm tone — Select the tone that you want to
use for the alarm clock.
• Network operator time — Update time, date, and
time zone information automatically (network
service). Select Auto-update to activate. This service
may not be available in all networks.
• Daylight-saving — Set the clock to automatically
adjust for daylight savings time. Select Auto-
update. This setting is only available if Network
operator time is set to Off.
Alarm clock
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether
you want to activate the device for calls. Select No to
switch off the device or Yes to make and receive calls.
Do not select Yes when wireless phone use may cause
interference or danger.
To set an alarm, select Options > Set alarm. Enter the
alarm time, and select OK.
To view and change alarms, select Options > Reset
alarm.
To remove an alarm, select Options > Remove alarm.
58
Clock
file:///C:/USERS/MODEServer/lkatajis/12724600/rm-89_smailer/en/issue_1/rm-89_smailer_en_1.xml Page 58 Jan 12, 2006 8:40:21 AM