Owner's manual

© 2014 Microsoft Page 41
After you download and run the applicable MSI setup application, follow the prompts and accept all of the defaults.
Windows Deployment Services
After Windows ADK and MDT are installed, you need to install and configure Windows Deployment Services (WDS) to
allow network boot in the environment. Each is described in the following sections.
Installing WDS
Because WDS is a role within Windows Server rather than a separate application, it does not need to be downloaded.
Instead you install WDS using Server Manager in Windows Server by following these steps:
1. Open Server Manager.
2. Click the Manage  Add Roles and Features menu as shown in Figure 3.7.
Figure 3.7: Windows Server 2012 R2 Server Manager.
3. Clicking Add Roles and Features brings up the Add Roles and Features Wizard shown in Figure 3.8.