Owner's manual

Figure 3.28: Surface Pro 3 Device Booting from the Network.

6. The network adapter will receive an IP address from a DHCP server and after the WDS PXE service is detected,

will prompt the user to press ENTER to begin the network boot process as shown in Figure 3.29.

Figure 3.29: Confirmation of Successful Connection to WDS Server.

Note: In order to press the Enter key, the Surface Type Cover or a USB keyboard should be connected.

After the network boot process has been initiated, the boot image generated for the MDT deployment share

(LiteTouchPE_x64.wim) will load. A progress bar appears along with the name of the loading image, as shown in Figure

3.30.

Figure 3.30: Network Boot Progress Bar.