Installation guide

Windows NT Installation Guide 13
System Minimum Firmware Version
AlphaPC 164 4.49-4
EB164 4.35
AlphaPC 64 3.5-10
EB66+ 3.5-10
EB64+ 3.5-4 (H1.6)
EB66 3.5-4 (H1.7)
Note: Firmware versions that are earlier than the minimum firmware
versions shown in the previous table must be updated before the installation.
3.1 Firmware Conventions
To select and choose different options in the Windows NT ARC firmware menus,
use the following keys:
Key Description
Arrow The arrow keys are used to select different options.
Enter The Enter key is used to choose the highlighted option.
Esc The Esc key is used to close a menu or cancel an operation.
3.2 Firmware Menus Access
When you power up your system, the firmware displays a blue screen on the
monitor, initializes the firmware drivers, and displays the Boot menu, the first
menu of the Windows NT ARC firmware menus. The currently selected option in
the menu is highlighted.
Note: If autoboot is enabled, you must cancel autoboot to interact with the
firmware. To cancel autoboot, press the Esc key before the timeout period
expires.