User`s guide

Chapter 4 Using the Microcal Diagnostic Utility 113
5. Highlight the desired protocol and then press Enter to save the
highlighted format and mode as the new data protocol.
The list of available protocols varies depending on your touchscreen
controller. If you select a Tablet format, you must also set the
controller’s communication parameters to N, 8, 1.
AutoBaud Detection and Disabling
AutoBaud detection is available in some MicroTouch controllers, but
may not be supported in future products.
MicroTouch recommends that you disable the AutoBaud feature and
manually set the communication rate.
To reset the controller to a specific communication rate, turn off the
AutoBaud feature and then set the new rate to be stored in the
controller’s memory.
If you disable the AutoBaud feature, Microcal displays a list of
communication rates from 1200 to 19200.