User Guide

Xbox 360 Faceplate
Thanks for choosing your Xbox 360™ Faceplate. Customize your Xbox 360
console with distinctive faceplates to match your personal style. Xbox
360 Faceplates feature:
High-quality materials resistant to scratching and fading.
Easy-to-change designs whenever you like.
Limited-edition designs.
Before using this product, read this manual and the Xbox 360
console manuals for important safety and health information. Keep
all manuals for future reference. For replacement manuals, see
www.xbox.com/support or call Xbox Customer Support (see ”If You
Need More Help”).
The limited warranty covering this product is contained in the Xbox 360
Warranty manual (Volume 2).
ATTACH YOUR FACEPLATE
To attach your faceplate:
1 Close the disc tray, remove all memory units, and turn off your console.
2 Remove the existing faceplate from the
console by locating the slot on the right side
of the faceplate (or bottom if the console is
oriented vertically) and pulling on it until it
detaches. Make sure you keep the console
from falling by firmly holding it in place as
you pull on the faceplate.
3 Align the tabs on the new faceplate with the
slots on the console and press it in place.
NOTE
Avoid pulling on your faceplate memory unit doors
when detached from the console, as they can
become separated from the faceplate.
TROUBLESHOOTING
Disc Tray Doesn’t Open
Remove the faceplate. Then carefully check the alignment and press the faceplate back onto
the console.
IF YOU NEED MORE HELP
Go to www.xbox.com/support or call Xbox Customer Support:
United States and Canada: 1-800-4MY-XBOX (1-800-469-9269)
TTY users: 1-866-740-XBOX (1-866-742-9269)
Mexico: 001-866-745-83-12
TTY users: 001-886-251-26-21
Colombia: 01-800-912-1830
Do not take your Xbox 360 console or its peripherals to your retailer for repair or service
unless instructed to do so by an Xbox Customer Support representative.
!
Do Not Attempt Repairs
Do not attempt to take apart, service, or modify the Xbox 360 console, power supply, or
its peripherals in any way. Doing so could present the risk of serious injury or death from
electric shock or fire, and it will void your warranty.
FOR CUSTOMERS IN THE UNITED STATES
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician to help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Trade
Name:
Microsoft Corp. Responsible
Party:
Microsoft Corporation
Address: One Microsoft Way Redmond,
WA 98052 U.S.A.
Telephone No.: (800) 4MY-XBOX
NOTE
Any changes or modifications made on the system not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
FOR CUSTOMERS IN CANADA
This device complies with ICES-003 of Industry Canada (IC). Operation is subject to the
following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
COPYRIGHT
Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless
otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places and
events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail
address, logo, person, place or event is intended or should be inferred. Complying with all applicable copyright laws is the
responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or
introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording,
or otherwise), or for any purpose, without the express written permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject
matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this
document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.
© 2005 Microsoft Corporation. All rights reserved.
Microsoft, Xbox, Xbox 360, and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
FACEPLATE FAÇADE CARÁTULA
0805 Part Number: X11-29993-01
Printed in China
!
WARNING

Summary of content (2 pages)