User Guide

english
5
To connect your console to
digital audio:
1 Connect the S-Video AV cable as
described in steps 1–3 of “To
connect to TV and audio.”
2 Connect your digital audio cable
(not included) to the digital audio
input on your receiver or TV and
the digital audio output on the
console end of the S-Video AV
cable connector.
3 Turn on your console. From the
System area, you can change your
audio and digital output settings.
Select the appropriate digital audio
setting for your system.
TROUBLESHOOTING
If you encounter problems, try the
possible solutions provided below.
Picture with No Sound
Make sure the video and audio
connectors are connected to the
same input group on the back of
your TV. If you’re using digital audio,
make sure the receiver is turned on
and the output is correctly set in the
Xbox Dashboard.
Sound with No Picture
Verify that the TV is turned on. Make
sure the audio and video connectors
are connected to the same input
group on the back of your TV. If
you’re using digital audio, make sure
the TV has been set to display the
input group into which the S-video
cable is plugged.