User`s manual

DIGITAL-LOGIC AG MSMVGA Manual V1.0

6.1.5 Selection of the Flash Sector

(for using C800-CFFF, as alternate Flash-BIOS Memory, use the 64k-GAL. The standard

implementation is 32k-GAL!)

J18, J19 Selected Sector: J18 J19

Sector 1 (Default) open open

Sector 2 closed open

Sector 3 open closed

Sector 4 closed closed

6.1.6 VEE Generator supply

If there is an external 12V power supply at the PC/104 BUS PIN B9, switch the Jumpers J25 and J26

to 2-3. With 12V at the VEE generator the stability of the VEE range is improved. VEE Range -35V to

+35V.

Jumper Function PIN PIN

J25 VEE Generator supply 1-2 = 5V * 2-3 = 12V

J26 VEE Generator supply 1-2 = 5V * 2-3 = 12V

• Default

6.1.7 Enable VEE Output at the J4

Pin 40 is selectable to output VEE supply or the P23

ATTENTION:

Select never the J27 to VEE-Output if a LCD is

connected with the digital P23 signal on the Pin 40

of the J4 (LCD-Outputconnector) !

The LCD will be destroyed immediately with the

overvoltage of the VEE generator !

Jumper Function

J8 N/A

J28 N/A

J29 N/A