User`s manual

22 ArtixScan 1800f Installation and Operation Manual
A. Positioning the Reflective Target
1. Place the target face down on the glass surface of the scanner, making sure that
the right side of the target is positioned toward the scanner's front panel and has
its edge firmly aligned against the scanner top ruler.
2. Using the scanner's top ruler as a reference point, adjust the target position so
that it is horizontally in the center of the glass surface.
B. Positioning the Transparent Target
1. Place the target face down in the 4" x 5" Film Holder. Note that the side of the
target (with the woman's portrait) is positioned toward the right side of the
scanner.
2. Put the 4" x 5" Film Holder into the Main Holder.
3. Insert the whole assembly into the transparency bay (the drawer or lower
compartment) of the scanner.
Make sure the woman's
portrait lies towards the
front of the scanner.
Make sure the woman's
portrait lies towards the
right side of the scanner.