User Guide

ManualsBrandsMicrotek ManualsOtherGNC I C580 XXXX

Installation

1. Turn off the computer.

2. Connect the video cable from VGA connector and audio line from output of the computer to the

monitor.

3. Connect power cable to the power outlet.

4. Turn on the monitor and the computer. Wait about 30 seconds to adjust the picture with the

adjustment controls to obtain the most optimum picture.

Note: Please do not press the panel heavily because the surface of LCD panel is soft.

Control Key Pads on the Front Panel

1. Menu Button : Press the keypad to enter OSD menu or swap between icon and sub-

items in OSD menu.

2. Left : Press button to activate the adjustment of volume when OSD is

off. Select icon or adjust the setting value of sub-item in OSD menu.

3. Up : Select sub-items in OSD menu.

4. Down : Select sub-items in OSD menu.

5. Right : Press button to activate the adjustment of brightness when OSD is

off. Select icon or adjust the setting value of sub-item in OSD menu.

6. Auto : Press the keypad to activate auto tuning when OSD is off. Press the

keypad to exit OSD menu or sub-items in OSD menu.

7. Power LED Indicator Green : Normal operation.

Orange : Enter soft-power off state.

Orange Blinking : No signal input or frequency out of range.

8 Power Switch : Press the keypad to power on or off.

Summary of content (6 pages)

PAGE 1
Installation 1. 2. 3. 4. Turn off the computer. Connect the video cable from VGA connector and audio line from output of the computer to the monitor. Connect power cable to the power outlet. Turn on the monitor and the computer. Wait about 30 seconds to adjust the picture with the adjustment controls to obtain the most optimum picture. Note: Please do not press the panel heavily because the surface of LCD panel is soft. Control Key Pads on the Front Panel 1. Menu Button : 2. 3. 4. 5. 6. 7.
PAGE 2
Layout of Cable & Connector on the Back Cover 1. D-Sub Connector 3. Earphone Output (optional) 2. Audio Line-in 4.AC In How to enter OSD Menu (1) Press Menu button and the OSD as shown will appear on the screen. (2) The OSD Menu contains 9 icons representing 9 functions for adjustment. (3) The hand pointing up is used to select the icon. (4) Press menu key to make the hand pointing up or down. (5) Press up and down key to select sub-item. Press left and right key to change the setting.
PAGE 3
Position AUTO LEFT/RIGHT DOWN/UP Auto adjust the position, horizontal clock and dot delay. Horizontal position, adjust the horizontal display screen position . Vertical position, adjust the vertical display screen position . Clock HORZ. TOTAL DOT DELAY RESET Horizontal total clock, adjust the Horizontal Size to match LCD size. Adjust the dot delay to get best display focus.
PAGE 4
Message of Auto Tuning Once you activate Auto Tuning, the following view indicating that the unit is executing Auto Tuning will be prompted. Successfully executing Auto Tuning, select ACCEPT by pressing key to confirm the adjustment Select UNDO to cancel the adjustment. If you do not make any selection within 5 seconds,then the unit will automatically confirm the adjustment. Notice 1. This function has to be executed when full screen picture is displayed.
PAGE 5
Message of Video Input The message below will be displayed when horizontal and vertical synchronous signal from outside is off or out of acceptable range of this system. This message is erased in about 5 seconds and the system goes into the power saving mode. (1) No H_sync or V_sync input (2) H_sync or V_sync out of range OUT OF RANGE HSYNC : 43.2 KHz VSYNC : 85.0 Hz WORK RANGE HS : 31.5 -60.
PAGE 6
Factory Default Timing Setting Resolution 640 x 350 640 x 400 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 H/V Frequency 31.5 KHz / 70.1 Hz 31.5 KHz / 70.1 Hz 31.5 KHz / 70.1 Hz 31.5 KHz / 60.0 Hz 35.0 KHz / 66.7 Hz (Macintosh) 37.9 KHz / 72.8 Hz 37.5 KHz / 75.0 Hz 35.2 KHz / 56.3 Hz 37.8 KHz / 60.3 Hz 48.0 KHz / 72.2 Hz 46.9 KHz / 75.0 Hz 49.7 KHz / 74.6 Hz (Macintosh) 48.2 KHz / 60.0 Hz 56.5 KHz / 70.1 Hz 60.