Manualshelf

Owner manual

ManualsBrandsMicrotel ManualsEquipmentD51T v.1.1
21222324252627282930
MICROTEL D51T
20
*00 Report system status
Example- Command: *00
Response: Channel one normally closed digital input in alarm.
Temperature is seven eight degrees. The local output is
open.
Controlling the local output relay
D51T has a set of output contacts that may be controlled from a touch-tone phone. These
contacts may be used to turn ON or OFF external equipment, or as a signal input to
another device. Simply enter the following command during a phone call to or from the
dialer, via either the phone or cellular connection.
NOTE: de-energized state is open.
*06 Review local output configuration
**06 0/1/2 Configure/Control local output
Example- Command: **060
Response: The local output is closed.
Example- Command: **061
Response: The local output is open.
Example- Command: **062
Response: The local output is fault status