User guide

Chapter Two – DiscView PRO Map
37
Jukebox Support Tab (DiscPort Executive Only)
If you have a DiscPort Executive installed and running as the
CD-ROM host, jukebox support is available. If the jukebox
driver is detected, the Jukebox Support tab is enabled.
Refer to Chapter Eight for a list of supported jukeboxes and
information about configuring the jukebox; installing the
jukebox drivers; and adding, modifying and deleting the
jukebox drivers.
Automatic Volume Configuration Tab
Click the Automatic Volume Configuration tab to view
volume configuration options. Click on the Enable Automatic
Volume Configuration checkbox to enable (default) or disable
the autoconfigure feature. See Chapter One - the Automatic
Volume Configuration section for details.
Set Security
DiscView PRO works with standard NetWare or native NT
security features to allow you to set security on one or more
fileservers or CD-ROM volumes. If you are running NetWare
3.x, when the CD-ROM volume is initially configured,
security is set so that the NetWare group, EVERYONE, has
access to it. If you are running NetWare 4.1, when the CD-
ROM volume is initially configured, security is set so that no
user has access to it, but managers/administrators do. If you
are running Windows NT, the group EVERYONE is assigned
access, and you can set share permissions for each CD-ROM
volume. You may want to restrict access to one or more users
or groups.
Automatic Volume Configuration
section