System Manual

26-0002-0003/5 (en) (2021) 10
2 GETTING STARTED
2.1 Stroke Application & Programming Software (SAPS) Hardware Setup
Figure 2.1: indicates the proper setup:
1. Connect the power cord to the power port on the laptop and connect the other end to the
wall outlet.
2. Connect the WT to a USB port on the laptop.
3. (Optional) Connect the push button to a USB port on the laptop.
A
Power Button
B
Power Cord
C
Push Button
D
Wireless Transmitter
Figure 2.1: SAPS Hardware Set-up Overview