System Manual

26-0002-0003/5 (en) (2021) 24
Figure 4.16: Stim Test Mode
Figure 4.17: Implant Settings
1. Select the button next to Stim Test Mode. The button will now toggle to On (see Figure
4.16).
2. Optionally, you may change the stimulation parameters displayed in the Implant Settings
menu (see Figure 4.17). For each of the settings (Amplitude, Frequency, Train
Duration, Pulse Width), click the button next to the setting, and a menu will drop down
containing all available parameters for that setting. Then select the appropriate value for
each parameter. Example drop-down menus for each parameter are shown above in
Figure 4.12 through Figure 4.15.