System Manual

26-0002-0003/5 (en) (2021) 38
2. Set the Therapy Trigger Mode parameters. Refer to Section 5.2.3: Setting Parameters
for details on setting all Therapy Trigger Mode parameters.
3. Select the VNS Pairing Therapy tab.
4. To start stimulation, select the Start button (see Figure 5.14).
NOTE: The task list drop-down menu is disabled and not required in this therapy mode.
Figure 5.14: Start Therapy Trigger Mode
5. To stop the stimulation upon completion of the therapy session or at any time during the
session, select the Stop button (see Figure 5.15).
NOTE: The SAPS automatically terminates the session if this session is left inactive for more
than 4 hours.