System Manual

26-0002-0003/5 (en) (2021) 41
5.2.3 Setting Parameters
For each of the settings (Train Period, Magnet Mode Duration, Randomization, Probability,
and Second Train Period), you must select the button next to the setting to enable all available
parameters for that setting, shown in a drop-down box. Not all parameters are available at all
the times based on the modes that are chosen. For example, Magnet Mode Duration is
accessible only when Magnet Mode is enabled. The appropriate value is selected for each
parameter. Parameter examples are shown in Figure 4.11 through Figure 4.15. The Train
Period parameter is reflected in the Program Implant menu (see Section 7.2: Magnet Mode)
and vice versa.