System Manual

26-0002-0003/5 (en) (2021) 60
Outer Material
PMMA plastic (plexiglas - black)
Size
~10 cm × 7.5 cm × 2.5 cm; no sharp corners
Cable Length
~2 m
Weight
~131 g
Connector Type
USB
Communication Distance
≤1 m
Communication Band
Medical Implantable Band (MICS, ~403 MHz)
Table 16.1: Characteristics of the Wireless Transmitter
16.4 Stroke Application & Programming Software (SAPS)
The SAPS software was developed by MicroTransponder to manage IPG therapy and therapy
information. The SAPS has the following capabilities:
• Allows the physician to set the IPG stimulation parameters
• Allows the physician to check the status of the IPG battery level
• Allows the physician to check the Lead impedance
• Allows the physician to record the rehabilitation task information
• Stores the therapy session history for review at a later time
• Requires the physician to use a SAPS password to access implant programming and
therapy functions
• Allows users without the SAPS password (but with the laptop password) to access patient
log and therapy information
The software is delivered to the physician pre-installed on a commercially available laptop.
See Section 3: Using the Software (SAPS) for more information on use of the SAPS.
16.5 Other Applicable MicroTransponder
®
Products
• Model 1001 IPG
• Model 3000 Lead
16.6 Applicable Commercial Devices for Use with MicroTransponder IPG
A commercial magnet with a pull force rated at 4.5 kg or greater is sufficient to close the reed
switch within the IPG and stop stimulation.