MICROVISION SHOWWX ™ L A S E R P I CO P R OJ E CTO R User Guide
Table of Contents Important Safety Information Important Safety Information................................................................................... 3 PLEASE READ, UNDERSTAND AND FOLLOW ALL SAFETY INFORMATION IN THIS USER GUIDE BEFORE YOU USE THIS PROJECTOR. FAILURE TO PROPERLY SET UP, USE, AND CARE FOR THIS PROJECTOR CAN INCREASE THE RISK OF INJURY, OR DAMAGE TO THE PROJECTOR. KEEP THIS USER GUIDE FOR FUTURE REFERENCE. Package Contents..........................................................
» Do not expose the battery to temperatures under -20°C or above 60°C. » Do not crush the battery. Safety Labels » Do not overcharge or rapidly discharge the battery. The SHOWWX™ Laser Pico Projector is a CLASS 2 LASER PRODUCT as defined in IEC 60825-1, 2007-03. Microvision has designed the SHOWWX to be safe for general use as a mobile projector. » Do not dispose of the battery by incineration or fire.
FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received including interference that may cause undesired operations. This applies to all product options. Package Contents + - Please make sure you have received all items included with the product. For missing items contact customer support.
SHOWWX™ Laser Pico Projector Introduction MICROVISION Thank you for purchasing the Microvision SHOWWX™ laser pico projector. The SHOWWX projects big, bright, and colorful images that are always in focus, yet is small enough to fit in your pocket. Connect the SHOWWX to a video output-capable device to spontaneously share photos and videos, presentations and more, in a big screen experience.
Connect to a Video Source Charge Battery The SHOWWX™ can connect to a variety of devices with TV-out such as an iPod®, a laptop, cell phone, camera, and more. The following describes the connectivity options available with the SHOWWX.
Note: » While connected to an iPod, the Audio Jack on the iPod can also be used. » To see compatible devices with the SHOWWX visit http://www.microvision.com/showwx/ Usage Guidelines There are two main factors to consider when using the SHOWWX. Ambient light Connecting to Other Composite (TV-out) Video Sources The SHOWWX can connect to other video sources that have Composite (TV-out) using the included Composite adapter. To display content, make sure the source device has TV-out set to “ON” or “Enabled”.
Advanced Controls How to Change Color Mode Menu Controls Brilliant Colors: Bright and vivid colors. Standard Colors: More accurate flesh tones and grey scales. Inverted Colors: All colors are inverted. Useful for presentations with black text on white backgrounds. The SHOWWX has 3 default color modes. The SHOWWX was designed as a plug-and-play device, however, some users may want to make adjustments to the settings such as change colors, adjust aspect ratio, and adjust brightness.
Troubleshooting How To Reset Default Settings To reset all user selectable settings to factory defaults. 1 2 Press the button to bring up the on screen menu. Use the or buttons to navigate to SYSTEM and press 3 Use the or 4 Press the or . buttons to navigate to RESET DEFAULTS and press buttons to select YES and press . . How to Check Remaining Battery Life Follow these instructions to view how much battery life is remaining.
INFORMACIÓN IMPORTANTE DE SEGURIDAD LED Status & Meaning LEA, ENTIENDA Y SIGA TODA LA INFORMACIÓN DE SEGURIDAD CONTENIDA EN ESTA GUÍA DEL USUARIO ANTES DE USAR ESTE PROYECTOR. NO CONFIGURAR, USAR Y CUIDAR EN FORMA ADECUADA ESTE PROYECTOR PUEDE INCREMENTAR EL RIESGO DE PRODUCIR DAÑOS O DETERIOROS EN EL PROYECTOR. CONSERVE ESTA GUÍA DEL USUARIO PARA REFERENCIA FUTURA.
Para evitar riesgos asociados con incendios y explosiones: » No sumerja el proyector o la batería en ningún líquido ni permita que alguno de ellos se moje. Tomar las siguientes precauciones al observar vídeos puede ayudar a reducir el riesgo de presentar convulsiones epilépticas fotosensitivas. » Use sólo el adaptador de corriente alterna y la batería proporcionados por Microvision. » No lo use cuando esté cansado o fatigado. » No desensamble ni modifique la batería de ningún modo.
ESPECIFICACIONES DEL LÁSER Color de láser Rojo Tipo de láser Diodo láser de AlGalnP Salida máx. de onda continua (CW) Este transmisor no debe colocarse u operarse en conjunto con cualquier otra antena o transmisor. Azul Diodo láser de GaN 90 mW PRECAUCIÓN: Los cambios o modificaciones realizados a este equipo que no hayan sido expresamente aprobados por el fabricante pueden anular la autoridad del usuario para operar este equipo.
6222 185th Avenue NE Redmond, WA 98052 USA www.microvision.com DA0125977-001 Rev.