User guide

12
13
Note:
» While connected to an iPod, the Audio Jack on the iPod can also be used.
» To see compatible devices with the SHOWWX visit http://www.microvision.com/showwx/
Connecting to Other Composite (TV-out) Video Sources
The SHOWWX can connect to other video sources that have Composite (TV-out) using the included
Composite adapter. To display content, make sure the source device has TV-out set to “ON” or
“Enabled”. To learn if your video source device is capable of TV-out and how to enable, refer to its
User Guide.
Connect the adapter to the projector
1
Connect the Composite adapter to
the yellow video RCA connector that
is connected to your TV-out device
Semi-Lit
Home / Office
<12”
24”-36”
70”-100”
Semi-Dark
Dimmed Lighting
Complete Darkness
2
Power on the projector
Enable video out from source device
and play video
3
4
Usage Guidelines
There are two main factors to consider when using
the SHOWWX.
Ambient light
» It is recommended to shut blinds, close curtains
and turn lights down to make the room dark so the
projected image looks the best.
Distance from screen
» The projector distance from the screen will impact
the appearance of the image brightness. The closer
to the screen the brighter the image will appear.
The following is a guideline of what image sizes are possible under various lighting
conditions:
Note: Image diagonal is approximately equal to the distance from the projector to the screen.
Ready To Use