User Manual
Contents 4 9 9 10 11 11 12 12 13 13 14 15 16 16 16 17 17 17 17 18 18 19 19 20 21 21 21 21 21 21 21 Important Safety Information Introduction Package Contents SHOWWX+™ HDMI Laser Pico Projector Getting Started Install Battery Charge Battery Power ON or OFF Connect to a Video Source How To Connect To An iPod, iPhone, or iPad Connecting To HDMI Video Sources Usage Guidelines Advanced Controls Menu Controls Onscreen Menu How To Adjust Brightness How To Change Color Mode How To Adjust Aspect Ratio How To Adju
Important Safety Information PLEASE REFER TO THE PRODUCT SAFETY INFORMATION GUIDE PROVIDED WITH YOUR SHOWWX+ HDMI FOR IMPORTANT SAFETY INFORMATION.
Safety Labels Regulatory Statements The SHOWWX+™ HDMI Laser Pico Projector is a CLASS 2 LASER PRODUCT as defined in IEC 60825-1, 2007-03. MicroVision has designed the SHOWWX+ HDMI to be safe for general use as a mobile projector. FCC Declaration of Conformity IEC and CDRH Statements of Compliance The SHOWWX+ HDMI complies with IEC 60825-1, 2007-03. The device also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007.
Introduction Regulatory Statements Other Compliance Some products may contain one or more of the following country marks on the Product Label, which is located under the battery. Presence of the mark on the label indicates compliance with the applicable regulations for that country. Australia/New Zealand (C-tick) Japan (PSC) China (CCC) Directions for recycling battery Recycle battery in accordance with local laws. In the United States and Canada, visit www.call2recycle.
SHOWWX+™ HDMI Laser Pico Projector Getting Started Install Battery 1 2 Micro HDMI Input Window 1 Down/Hot Key 2 Remove Battery Door Up/Hot Key 1 1 2 2 2 Insert Battery 1 Power Button Menu/Select Button LED Indicators Micro-USB/Power Input Video Input Wrist Strap Holder 10 3.5mm Audio Jack 3 Close Battery Door » Make sure the projector is OFF and unplugged before replacing battery. » Do not force the battery in. Make sure the battery + / - symbols are lined up.
Charge Battery Connect to a Video Source The SHOWWX+™ HDMI can connect to a variety of devices with video-out such as an iPad, iPhone, iPod, tablet computer, laptop, cell phone, camera, and more. The following describes the connectivity options available with the SHOWWX+ HDMI.
Connecting to HDMI Video Sources Usage Guidelines The SHOWWX+ HDMI can connect to a variety of devices that provide HDMI video-out. A micro-to-micro HDMI cable is provided. HDMI-approved third party cables are available supporting standard and mini to micro connectivity. SHOWWX+ HDMI is HDCP compliant and as such can display rights managed (HDCP) content. To display content, if not automatic make sure the source device has TV/Video-Out set to “On” or “Enabled”.
Advanced Controls How To Adjust Brightness Menu Controls The image brightness can be reduced for close distance viewing in darker environments. The SHOWWX+ HDMI was designed as a plug-and-play device, however, some users may want to make adjustments to the settings such as change colors, adjust aspect ratio, and adjust brightness. The following information will help you understand how to fully operate the SHOWWX+ HDMI. Hot Keys 1 button to bring up the on screen menu.
How To Adjust The Color Alignment How to Check Remaining Battery Life Users can adjust horizontal or vertical alignment of each individual color (red, green, and blue). Follow these instructions to view how much battery life is remaining. 1 button to bring up the on screen menu.
Troubleshooting LED Status & Meaning Problem Cause Solution LED Status Meaning The projector does not turn on. Battery not inserted correctly. Battery not charged. Make sure the battery is correctly inserted. Make sure the battery is fully charged.
MicroVision Limited Warranty MicroVision warrants that the following Products will be free of defects in material and workmanship under normal use for the period stated below beginning on the date of purchase by the original purchaser (“Warranty Period”): Product and Warranty Period SHOWWX+ HDMI Laser Pico Projector One (1) year SHOWWX+ HDMI Accessories (including battery, AC adapter, cables) Ninety (90) days If a valid warranty claim is received by MicroVision or its authorized service representative durin
6222 185th Avenue NE Redmond, WA 98052 USA microvision.com Model Number: M-1612-A Copyright & Trademarks ©2011 MicroVision, Inc. All rights reserved. PicoP® and SHOWWX+™ are trademarks of MicroVision Inc. iPhone, iPod, iPod classic, iPod nano, iPod touch and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. HDMI is a registered trademark of HDMI licensing LLC.