User's Manual

change to the screen shown above.

To access the channel assignment menu, first touch the SET FREQUENCY button on the

screen. You will notice that one of the digits in the FREQUENCY bar will now have a black,

blinking cursor.

Using the left and right arrows below the FREQUENCY bar, navigate the blinking cursor to the

digit that will be changed first. In the screen shot above for example, the current frequency of

channel 2 is 6438.000 MHz, however you want to change this to 6455.000.

1) Touch the set frequency button

2) Using the arrows, move the cursor to the 3 (third digit)

3) Touch the UP button once to change the 3 to a 4

4) Move the cursor to the 8 (fourth digit)

5) Touch the DOWN button three times to change the 8 to a 5

6) Touch the BACK button to save the new frequency

If you wish to add or change another channel, go to that channel while in the main screen, then

touch the channel menu button and repeat the process above. This process must be repeated

each time a channel is added or changed.