Technical Manual

MAIN SCREEN OPERATION

When operating the HDX-1100 transmitter in local mode (touch screen active), the main screen

will be displayed first. The current preset and channel selections are controlled by touching the

up and down buttons below the respective sections of the display. For example, to move to a

lower channel, touch the down arrow below the CHANNEL bar in the main screen.

High or low power may be selected by touching the PA HIGH/ LOW button, which will toggle the

setting between HIGH and LOW each time the button is touched. The label will change to

confirm that the new selection has been completed.

PA ON or PA OFF settings are selected by touching the PA ON/OFF button, which will toggle the

setting between ON and OFF each time the button is touched. The label will change to confirm

that the new selection has been completed.

NOTE: When changing channels or presets, the PA will automatically shut off to avoid

interference with other users, as the frequency changes. It must be manually turned on

again once the frequency change is complete (the display will change to new channel

selection).

Channel

Channel: Displays current channel selection

MHz: Frequency of current channel

Left/Right Arrows : move cursor left or right

Up – Down: Changes the selected frequency digit

Set Frequency: Touch this button to set or change current channel

Back: Will save setting and return to Main screen