Technical Manual

4. [R] Centimeters to feet = Centimeters * .0328

5. Square R

6. Multiply R² * 4

7. [S] Divide (R² * 4

π ) into

EIRP

S = Power Density in milliwatts per square centimeters.

Note

At frequencies above 1500 MHz, S must not be greater than 1.

Reference

FCC OET Bulletin 65, August 1997 - Evaluating Compliance with FCC Guidelines for Human

Exposure to Radio Frequency Electromagnetic Fields

Vislink, in accordance with the requirements set forth by the FCC, provides this information as a

guide to the user and assumes the users of this equipment are licensed and qualified to operate

the equipment per the guidelines and recommendations contained within the product user

guides and in accordance with any FCC rules that may apply.